OCTAVE delaytm.m - Conventional refraction delay time analysis (shot profiles)
delaytm prompts for:
System matrix
file, Data file, Elevation file (GUI Entry Box)
Number of shots (GUI Entry Box)
Smoothnes Weight 0<W<1 (the larger W, the poorer the
data fit) (GUI Entry Box)
GUI Pop Up Box, Solution for refractor velocity and shot
delay times (Click OK)
Plot of receiver delay times
Entry box for overburden velocity (from direct.m for
example) (GUI Entry Box)
Plot resolving delay times to structure of refractor.
Layers: overburden, refractor
Entry box for a constant surface to refractor alternative
(GUI Entry Box)
Plot resolving delay times as velocity of overburden
Entry box for number of constraint equations in system
matrix (GUI Entry Box)
Plot showing fit of first breaks for each shot-receiver
profile
Basic Seismic Utilities (BSU) program run in Octave or Matlab. This is the normal refraction shooting designed. Inputs to delaytm.m include files generated by program bref. The structure of the system matrix file is shot columns followed by receiver columns followed by the receiver-shot distance column on the far right. Within an octave session, type delaytm and a GUI entry box will pop up with the names of 3 files to process. These include a system matrix (G001), a data vector with observed first arrivals (D001), an elevations file (E001). You may need to change these file names depending on line number used in bref. Additional prompts as shown above. For reciprocal refraction delay time analysis see delaytmR.m.
Message box of
receiver delay times on shore
Plot of receiver delay times
Plot of refractor structure below surface. (delay times
--> structure)
Alternative Plot of overburden velocity variation (delay
times --> overburden velocity)
Plot of receiver stations and observed first arrival times
with solid lines predicted by solution.
G001 system
matrix (or some other name, depends on line number entered
into bref)
First columns are shot columns, then receiver columns,
finished by offset column
May include constraint rows at bottom.
D001 observed data (first break, shot station) pairs plus
any constraints at bottom.
E001 (receiver number, receiver station, elevation)
triplets
bpic(1) bref(1) OCTAVE: segyinfo.m(7) bsegin.m(7) segpic.m(7) delaytmR.m(7) direct.m(7)
No known bugs.
Copyright © 2024 by Paul Michaels
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
P. Michaels, PE. <[email protected]>